Thank you for writing to us. One of our executive will reach back to you through your submitted medium. In case there’s an urgency, feel free to connect over WhatsApp for faster response.
Prefer calling? Dial +9108048039001 (international callers) or 08048039001 (Indian callers).
Nironics 50
Features
Nitronic 50 Stainless Steel is an austenitic stainless steel with a blend of strength and corrosion resistance that is better than Stainless Steel 316, 316L, 317 and 317L. In fact, Nitronic 50 has about double the yield strength at room temperature compared to Stainless Steel 316/316L and 317/317L. Additionally, Nitronic 50 Stainless Steel has good mechanical properties at elevated and sub-zero s. temperatures. Another characteristic of Nitronic 50 is that it does not become magnetic even when severely cold worked - unlike many other austenitic stainless steels. Another advantage of using Nitronic 50 Stainless Steel is its outstanding corrosion resistance in harsh environments, especially in marine application As noted previously, Nitronic 50 is much stronger than Stainless Steel 316/316L and 317/317L; however, the same fabrication equipment and procedures used for the Stainless Steel 300 grades can be utilized for Nitronic 50. In addition, the same cooling techniques used for Stainless Steel 316/316L and 317/317L can be utilized for Nitronic 50.
Grades Available :
XM-19 (UNS S20910)
Nitronic 50 Annealed
XM-19HS
Nitronic 60
Nitronic 60 Stainless Steel is an austenitic alloy, considered to have the best galling resistance of the entire range of Stainless Steels.
Characteristics of Nitronic 60 include
• High pitting resistance
• Outstanding corrosion resistance Good high temperature properties for temperatures around 982 degrees Centigrade
• Oxidation resistance
• Crevice corrosion and chloride pitting resistance is greater than Stainless Steel 316.
Nitronic 60 can be formed using common forming techniques, and pre-heating is not required to weld Nitronic 60. Common welding methods such as gas metal arc, gas tungsten arc and submerged arc can be used to weld Nitronic 60. Hardening Nitronic 60 Stainless Steel calls for the alloy to be cold worked.
Primary Elements:
• Between 16 and 18 percent Chromium
• 8 to 9 percent Nickel
• 7 to 9 percent Manganese
• 3.5 to 4.5 percent Silicon
• Halance being Iron
• Trace amounts of Carbon, Sulfur, Phosphorus and Nitrogen
Industries Served :
• Oil and gas production
• Hydroelectric power
• Petrochemical
• Food processing
• Automotive
• Marine
• Pharmaceutical
• Construction and chemical sector.
Shyam Metal and Alloys are compression type, Double ferrule tube fittings. The Double ferrules optimize sending and tube gripping function to provide excellent leak + tight connection. Variety of end connections-: Male & Female NPT, BSPP, BSPT, ISO tapered pipe ends. Used in Control Systems, Process and Instrumentation, Industrial Equipment. For Various Industries Such as, • Petroleum Process Plants. • Chemical Process Plants. • Chromatography. • Oil & Gas Industries. • Power generation Plants. • Pulp paper Machinery. • Refineries.
Tube sizes :-
1/16”OD TO 2” OD, 2 MM TO 50 MM OD
Thread :-
NPT BSP BSPT, UNF
Pressure ratings :-
6000PSI FOR S.S, 300/ 1000/ 3000PSI FOR BRASS
Forms :-
Tube to Tube – Straight, Elbow, Tee, Cross, Bulk Head, Male Stud, Male Elbow, Male tee, Female Connector, Female Straight, Elbow, Tee, Positional Elbow, Tee (swivel), Tube closure, Plug, Cap, Weld Connector, Nut, Ferrule Set.
Instrumentations :-
Air Header( 6Way / 8Way/ 10Way / 12Way & Customized), Manifold-Vlaves (2 Ways Manifold, 3ways Manifold, 5ways Manifold), Condensate Pot (customized), Thermo-well, Pressure Gauges, Temperature Gauges, Temperature Sensors,
Material :-
Stainless Steel, Inconel, Monel, Hastelloy, Duplex Steel, Copper Alloys, High Nickel Alloys.
